carrier-explode iOS carrier and country bundles
205 of 205
Claro_arAR Argentina country bundle
  1. OTA · iOS Watch 1+ · build 11.1 · Watchshown
OTA · iOS Watch 1+ · build 11.1 · Watch (1)
  1. OTA · iOS Watch 1+ · build 11.1 · Watchshown
DataIndicatorOverrideForLTE = "4G"
Forces the status-bar label on LTE — this is how a carrier displays '5GE' or '4G' where the radio is LTE.
Enable4GByDefault = true
SupportsNITZ = false
MyAccountURL = "http://www.claro.com.ar/"
EnableLTEAfterUpgrade = true
RegistrationOptInRequired = true
MyAccountURLTitle = "Claro Argentina"
StockSymboli [] 2
[0] {} 2
symbol = "AMX"
name = ""
[1] {} 2
symbol = "^MERV"
name = ""
SupportedSIMs [] 1
MCC+MNC values (optionally with _GID1-/_GID2-/_ID- qualifiers) this bundle claims. The handset picks a bundle by matching the SIM against this list.
[0] = "722310"
IMSConfig {} 5
IMS (VoLTE / Wi-Fi Calling) stack configuration: SIP signalling, media/SRTP, registration and headers.
Signaling {} 21
AdditionalContactParams {} 1
UseOutgoingSipUri = true
TriggerCSFBOnSDPError = true
RegistrationRetryIntervals = "30,60+15,120,480,900,1800"
SupportPEarlyMediaHeader = true
ussdEnabled = false
QosOptionsClass = "voice"
EarlyMediaNeedsHeader = true
WaitForRingingTimerMOSeconds = 20
InviteErrorResponsesToTriggerCSFB = "3XX,4XX,5XX,6XX"
AlwaysSendSessionProgress = true
MaxUdpMessageSize = 1200
TriggerCSFBOnWaitForRingingTimeout = true
RingbackTimerSeconds = 90
WaitForRingingTimerMTSeconds = 25
CountryOfOriginationFormat = "PANI"
EnableCellularNetworkInfo = true
Preconditions = "Supported"
RingingTimerSeconds = 90
UseIPSec = true
AddQosOptionsToSockets = true
AllowHandoverWithoutIMSVoiceService = true
Media {} 8
RTCPIntervalSeconds = 5
ModeChangeCapability = 2
EnableBandwidthSpecifiers = true
PreferredAMRNBMode = 7
InactivityTimerRTCPSeconds = 25
PreferredAMRWBMode = 8
InactivityTimerRTPSeconds = 30
IncludeSDPModeChangeCapability = true
EnableWiFiCallingWithoutEntitlement = true
Voice {} 3
EnableVolteByDefault = true
E911OverITechSupported = false
E911OverIMSSupported = false
ShowDialAssist = false
Show3GSwitchWith4G = false
SupportsVolteCapability = true
CarrierName = "CLARO Argentina"
Operator name shown in the status bar and in Settings.
AttachAPN {} 1
The APN attached at LTE/NR registration, before any user-selected APN.
3GPP {} 5
password = ""
PcscfAddressRequired = false
username = ""
apn = "igprs.claro.com.ar"
AllowedProtocolMask = 1 bits 0 · 0x1
SupportsUserBusyCauseCode = true
SupportsImsCapability = true
OverrideOperatorName = "Claro AR"
ShowTTY = false
RemoteCardProvisioningSettings {} 1
eSIM download settings: SM-DP+ hostnames, ICCID prefixes that match this carrier, and whether an Apple ID check is required.
ServerURL = "cti.prod.ondemandconnectivity.com"
ShowLTEWarningUnsupportedCarrier = false
apns [] 2
Access Point Names. Each entry carries a type-mask (which services may use it) and a tech-type-mask (which radio technologies).
[0] {} 4
type-mask = 32769 bits 0, 15 · 0x8001
Bitmask of service classes allowed on this APN (internet, MMS, tethering, IMS, …).
password = "clarogprs999"
username = "clarogprs"
apn = "igprs.claro.com.ar"
[1] {} 7
DefaultProtocolMask = 2
password = "claro"
type-mask = 131072 bits 17 · 0x20000
Bitmask of service classes allowed on this APN (internet, MMS, tethering, IMS, …).
SupportSwitchOver = true
username = "claro"
apn = "ims"
AllowedProtocolMask = 2 bits 1 · 0x2
782 carriers, 225 countries · iOS 27.0 (24A437) Claro_ar GitHub Ready