carrier-explode Explode and decode carrier data GitHub About
792
overrides_N66_N71.der.pri Whole bundle
overrides_N66_N71.der.pri changed 55 rows Before After
Key pathBeforeAfter
efs./data/ds_dsd_apm_rules.txtabsent
APN_String:vzwims; ATTACH_TYPE_RULES:TRUE; P-CSCFRequired:2; IPAddressRequired:2; ON_DEMAND_TYPE_RULES:TRUE; P-CSCFRequired:2; IPAddressRequired:2; APN_String:tracfone.vzwentp; ATTACH_TYPE_RULES:TRUE; P-CSCFRequired:4; IPAddressRequired:5; ON_DEMAND_TYPE_RULES:TRUE; P-CSCFRequired:4; IPAddressRequi…
APN_String:vzwims;
ATTACH_TYPE_RULES:TRUE;
P-CSCFRequired:2;
IPAddressRequired:2;
ON_DEMAND_TYPE_RULES:TRUE;
P-CSCFRequired:2;
IPAddressRequired:2;

APN_String:tracfone.vzwentp;
ATTACH_TYPE_RULES:TRUE;
P-CSCFRequired:4;
IPAddressRequired:5;
ON_DEMAND_TYPE_RULES:TRUE;
P-CSCFRequired:4;
IPAddressRequired:5;
efs./nv/item_files/modem/data/3gpp/ps/rel_10_throttlingabsent1
efs./nv/item_files/modem/data/3gpp/ps/rel_10_throttling_per_plmnabsent1
efs./nv/item_files/modem/lte/common/ca_disable0absent
efs./nv/item_files/modem/mmode/sms_domain_prefabsent1
efs./nv/item_files/modem/nas/mav_hpplmn_scan_throttler/config_paramsabsent10 bytes
efs./nv/item_files/modem/qmi/cat/qmi_cat_block_sms_pp_envabsent0
efs./policyman/carrier_policy.xml
<?xml version="1.0" encoding="UTF-8"?> <!-- Device configuration file for SRLTE with CHGWL roaming --> <!-- Power-up directly into SRLTE mode, bypassing CSFB --> <policy name = "generic" enabled = "true" schema_ver = "1" policy_ver = "94.1.0" > <initial> …
<?xml version="1.0" encoding="UTF-8"?>

<!-- Device configuration file for SRLTE with CHGWL roaming -->
<!-- Power-up directly into SRLTE mode, bypassing CSFB -->

<policy name        = "generic"
        enabled     = "true"
        schema_ver  = "1"
        policy_ver  = "94.1.0"
>

  <initial>
    <actions>

      <!-- List of the MCCs in which SRLTE is allowed -->
      <mcc_list name="sxlte_mccs"> 310 311 312 </mcc_list>

      <!-- These are the serving system PLMNs for which SRLTE will be allowed
       -->
      <!-- NOTE: Proper functioning of the SXLTE policy requires that there
           be an PLMN list named "sxlte_plmns". Do NOT rename this list.
      -->
      <plmn_list name = "sxlte_plmns">
        311-480
      </plmn_list>

      <!-- Define the hybr_oos timer with a 1 minute interval -->
      <define_timer name = "hybr_oos" interval = "1" units = "min" id = "101" />

      <!-- Define device configuration as Single SIM -->
      <device_configuration num_sims="1" max_active="1">
        <config>
          <subs id="1" feature="srlte">
            <rat_capability base="none" >
              <include> CDMA HDR GSM WCDMA LTE </include>
            </rat_capability>
          </subs>
        </config>
      </device_configuration>

      <!-- Define initial RAT capability as CHL for SUBS1-->
      <rat_capability subs="1" base="none" >
        <include> CDMA HDR GSM WCDMA LTE </include>
      </rat_capability>

      <!-- Define Intial UE mode as 1X_CSFB_PREF -->
      <ue_mode_if subs="1"> 1X_CSFB_PREF </ue_mode_if>

      <!-- Define an RF band list that excludes TDS bands -->
      <rf_band_list name="rf_bands_gwl">
        <gw_bands base="hardware" />
        <lte_bands base="hardware" />
        <tds_bands base="none" />
      </rf_band_list>

      <!-- On boot, include FDD LTE bands for SUBS1 -->
      <rf_bands subs="1" list="rf_bands_gwl" />

      <!-- Boolean: Is the device at home? -->
      <boolean_define name="home" initial="true" />
      <boolean_set name="home">
        <ue_mode_is> 1X_CSFB_PREF </ue_mode_is>
      </boolean_set>

      <boolean_define name="cm:pwr_up_in_srlte" initial="false" />
      <boolean_set name="cm:pwr_up_in_srlte">
        <not> <volte_enabled /> </not>
      </boolean_set>

    </actions>
  </initial>

<!--
  ====================================================================
    Rules to handle OOS situations and timers.
  ====================================================================
  -->

  <!-- RULE #1 -->
  <!-- Update powerup option based on VoLTE enablement
  -->
  <rule precond="none">
    <conditions>
      <true />
    </conditions>
    <actions>
      <boolean_set name="cm:pwr_up_in_srlte">
        <not> <volte_enabled /> </not>
      </boolean_set>
      <continue />
    </actions>
  </rule>

  <!-- RULE #2 -->
  <!-- This rule only runs when we have service on the mmode subs, and sets
       the "home" boolean based on mmode subs MCC.  As well, stop the timer,
       since we have mmode subs service, move to full service and continue
       evaluation.
  -->
  <rule>
    <conditions>
      <service_status_in> FULL LIMITED LIMITED-REGIONAL </service_status_in>
    </conditions>
    <actions>
      <boolean_set name="home">
        <serving_mcc_in list="sxlte_mccs" />
      </boolean_set>
      <svc_mode subs="1"> FULL </svc_mode>
      <continue />
    </actions>
  </rule>

  <!-- RULE #3 -->
  <!-- If we have no service on the multimode subscription and we are ONLINE
           OR if we are LPM do not continue to other rules.
  -->
  <rule precond="none">
    <conditions>
      <any_of>
        <any_of>
          <phone_operating_mode> SLEEP </phone_operating_mode>
          <phone_operating_mode> OFFLINE </phone_operating_mode>
        </any_of>
        <all_of>
          <phone_operating_mode> ONLINE </phone_operating_mode>
          <not> <service_status_in subs="mmode"> FULL LIMITED LIMITED-REGIONAL </service_status_in> </not>
        </all_of>
      </any_of>
    </conditions>
    <actions/>
  </rule>

<!--
  ====================================================================
    Rules to implement SRLTE
  ====================================================================
  -->

  <!-- RULE #4 -->
  <!-- If conditions allow, operate as SRLTE with CHGWL.
  -->
  <rule>
    <conditions>
      <boolean_test name="home" />
      <sim_type> 3G </sim_type>
    </conditions>

    <actions>
      <ue_mode subs="1"> 1X_CSFB_PREF </ue_mode>
      <rat_capability subs="1" base = "none">
        <include> CDMA HDR GSM WCDMA LTE </include>
      </rat_capability>
      <rf_bands subs="1" list="rf_bands_gwl" />
    </actions>
  </rule>

  <!-- RULE #5 -->
  <!-- Anything else is CSFB with CHGWL.
  -->
  <rule>
    <conditions>
      <true />
    </conditions>
    <actions>
      <ue_mode subs="1"> CSFB </ue_mode>
      <rat_capability subs="1" base = "none">
        <include> CDMA HDR GSM WCDMA LTE </include>
      </rat_capability>
      <rf_bands subs="1" list="rf_bands_gwl" />
    </actions>
  </rule>

</policy>
<?xml version="1.0" encoding="UTF-8"?> <!-- Device configuration file for SRLTE with CHGWL roaming --> <!-- Power-up directly into SRLTE mode, bypassing CSFB --> <policy name = "generic" enabled = "true" schema_ver = "1" policy_ver = "94.1.1" > <initial> …
<?xml version="1.0" encoding="UTF-8"?>

<!-- Device configuration file for SRLTE with CHGWL roaming -->
<!-- Power-up directly into SRLTE mode, bypassing CSFB -->

<policy name        = "generic"
        enabled     = "true"
        schema_ver  = "1"
        policy_ver  = "94.1.1"
>

  <initial>
    <actions>

      <!-- List of the MCCs in which SRLTE is allowed -->
      <mcc_list name="sxlte_mccs"> 310 311 312 330 </mcc_list>

      <!-- These are the serving system PLMNs for which SRLTE will be allowed
       -->
      <!-- NOTE: Proper functioning of the SXLTE policy requires that there
           be an PLMN list named "sxlte_plmns". Do NOT rename this list.
      -->
      <plmn_list name = "sxlte_plmns">
        311-480 330-120
      </plmn_list>

      <!-- Define the hybr_oos timer with a 1 minute interval -->
      <define_timer name = "hybr_oos" interval = "1" units = "min" id = "101" />

      <!-- Define device configuration as Single SIM -->
      <device_configuration num_sims="1" max_active="1">
        <config>
          <subs id="1" feature="srlte">
            <rat_capability base="none" >
              <include> CDMA HDR GSM WCDMA LTE </include>
            </rat_capability>
          </subs>
        </config>
      </device_configuration>

      <!-- Define initial RAT capability as CHL for SUBS1-->
      <rat_capability subs="1" base="none" >
        <include> CDMA HDR GSM WCDMA LTE </include>
      </rat_capability>

      <!-- Define Intial UE mode as 1X_CSFB_PREF -->
      <ue_mode_if subs="1"> 1X_CSFB_PREF </ue_mode_if>

      <!-- Define an RF band list that excludes TDS bands -->
      <rf_band_list name="rf_bands_gwl">
        <gw_bands base="hardware" />
        <lte_bands base="hardware" />
        <tds_bands base="none" />
      </rf_band_list>

      <!-- On boot, include FDD LTE bands for SUBS1 -->
      <rf_bands subs="1" list="rf_bands_gwl" />

      <!-- Boolean: Is the device at home? -->
      <boolean_define name="home" initial="true" />
      <boolean_set name="home">
        <ue_mode_is> 1X_CSFB_PREF </ue_mode_is>
      </boolean_set>

      <boolean_define name="cm:pwr_up_in_srlte" initial="false" />
      <boolean_set name="cm:pwr_up_in_srlte">
        <not> <volte_enabled /> </not>
      </boolean_set>

    </actions>
  </initial>

<!--
  ====================================================================
    Rules to handle OOS situations and timers.
  ====================================================================
  -->

  <!-- RULE #1 -->
  <!-- Update powerup option based on VoLTE enablement
  -->
  <rule precond="none">
    <conditions>
      <true />
    </conditions>
    <actions>
      <boolean_set name="cm:pwr_up_in_srlte">
        <not> <volte_enabled /> </not>
      </boolean_set>
      <continue />
    </actions>
  </rule>

  <!-- RULE #2 -->
  <!-- This rule only runs when we have service on the mmode subs, and sets
       the "home" boolean based on mmode subs MCC.  As well, stop the timer,
       since we have mmode subs service, move to full service and continue
       evaluation.
  -->
  <rule>
    <conditions>
      <service_status_in> FULL LIMITED LIMITED-REGIONAL </service_status_in>
    </conditions>
    <actions>
      <boolean_set name="home">
        <serving_mcc_in list="sxlte_mccs" />
      </boolean_set>
      <svc_mode subs="1"> FULL </svc_mode>
      <continue />
    </actions>
  </rule>

  <!-- RULE #3 -->
  <!-- If we have no service on the multimode subscription and we are ONLINE
           OR if we are LPM do not continue to other rules.
  -->
  <rule precond="none">
    <conditions>
      <any_of>
        <any_of>
          <phone_operating_mode> SLEEP </phone_operating_mode>
          <phone_operating_mode> OFFLINE </phone_operating_mode>
        </any_of>
        <all_of>
          <phone_operating_mode> ONLINE </phone_operating_mode>
          <not> <service_status_in subs="mmode"> FULL LIMITED LIMITED-REGIONAL </service_status_in> </not>
        </all_of>
      </any_of>
    </conditions>
    <actions/>
  </rule>

<!--
  ====================================================================
    Rules to implement SRLTE
  ====================================================================
  -->

  <!-- RULE #4 -->
  <!-- If conditions allow, operate as SRLTE with CHGWL.
  -->
  <rule>
    <conditions>
      <boolean_test name="home" />
      <sim_type> 3G </sim_type>
    </conditions>

    <actions>
      <ue_mode subs="1"> 1X_CSFB_PREF </ue_mode>
      <rat_capability subs="1" base = "none">
        <include> CDMA HDR GSM WCDMA LTE </include>
      </rat_capability>
      <rf_bands subs="1" list="rf_bands_gwl" />
    </actions>
  </rule>

  <!-- RULE #5 -->
  <!-- Anything else is CSFB with CHGWL.
  -->
  <rule>
    <conditions>
      <true />
    </conditions>
    <actions>
      <ue_mode subs="1"> CSFB </ue_mode>
      <rat_capability subs="1" base = "none">
        <include> CDMA HDR GSM WCDMA LTE </include>
      </rat_capability>
      <rf_bands subs="1" list="rf_bands_gwl" />
    </actions>
  </rule>

</policy>
featureGroups.Data Service Feature Group[1]absent10
header.PRI Revision0.2.0730.2.075
named.ACCOLOCabsentDefault:[pESN1]
named.AN NAIabsentDefault:000000[pESN4]@vzw3g.com
named.AN PasswordabsentDefault:00000000000000000000000000000000
named.DUN MIP NAIabsentDefault:000000[pESN4]@dun.vzw3g.com
named.DUN SIP NAIabsentDefault:000000[pESN4]@dun.vzw3g.com
named.HA Pri IP Addressabsent(255.255.255.255)
named.HA Sec IP Addressabsent(255.255.255.255)
named.Home IP Addressabsent(0.0.0.0)
named.IMSI_SabsentDefault:000000[pESN4]
named.MDNabsentDefault:000000[pESN4]
named.MIN1absentDefault:000[pESN4]
named.MIN2absentDefault:000
named.MIP MN-AAA Shared SecretabsentDefault:00000000000000000000000000000000
named.MIP MN-HA Shared SecretabsentDefault:00000000000000000000000000000000
named.MIP NAIabsentDefault:000000[pESN4]@vzw3g.com
named.MN AAA SPI Setabsenttrue
named.MN AAA SPI Valueabsent2
named.MN HA SPI Setabsenttrue
named.MN HA SPI Valueabsent300
named.Reverse Tunnelingabsenttrue
named.SIP NAIabsentDefault:000000[pESN4]@vzw3g.com
named.SIP PasswordabsentDefault:00000000000000000000000000000000
nvItems[119]absent58001
nvItems[120]absent58002
nvItems[121]absent58003
nvItems[122]absent58004
nvItems[123]absent58005
nvItems[124]absent58013
nvItems[125]absent50014
nvItems[126]absent50034
nvItems[127]absent58014
schema[151]absent/nv/item_files/modem/data/3gpp/lteps/disable_apn_matching
schema[152]absent/nv/item_files/modem/lte/L2/mac/lte_mac_configure_maverick_aas_params
schema[153]absent/nv/item_files/modem/data/3gpp/lteps/allow_def_lte_pdn_teardown
schema[154]absent/nv/item_files/modem/nas/eplmn_cell_reselect
schema[155]absent/nv/item_files/modem/lte/rrc/cap/disable_cap_ies
schema[156]absent/nv/item_files/modem/lte/rrc/cap/enable_cap_ies
schema[157]absent/nv/item_files/modem/lte/rrc/csp/mav_q_qualmin
schema[158]absent/nv/item_files/ims/mav_crash_on_initialize_failure
schema[159]absent/nv/item_files/modem/nas/hplmn_rat_order_ctrl
schema[160]absent/nv/item_files/data/3gpp2/disable_eHRPD_PDN_type_override
schema[161]absent/nv/item_files/wcdma/rrc/rrc_fe_fach_support
schema[162]absent/nv/item_files/modem/lte/rrc/csp/band_priority_list
schema[163]absent/nv/item_files/modem/mmode/mmode_1xsxlte_optimization
schema[164]absent/nv/item_files/modem/nas/nas_config_feature