carrier-explode Explode and decode carrier data GitHub About
794
JioRelianceJio_in

overrides_V59.der.pri Modem package; this file is its whole carrier config.

Header
PRI Revision0.0.21
PRI NameRelianceJio_in
Baseband overrides (165)
dyn_cps {} 10
apf {} 4
cc7_to_cc14_enabled =1
lte_data_stall_mitigation_config {} 4
special_eplmn.extend_mm_ehplmn_list {} 2
{} 2
non_customized_items.urrc_config {} 1
optimize_conn_reject_wait_time =1
mm {} 6
mm_use_plmnwact =1
mm_use_default_rat_after_detach =1
mm_default_rat_at_power_on =1
mm_reg_rej_motion_enh =1
mm_deact_react_ndds_internet_on_ndds_page =1
mm_emergency_vonr_supported =1
ps_features {} 4
sic_dynamic_sa_only =1
sic_dynamic_vonr =1
sic_mitigate_smf_change_over_failure =1
sic_csi_deactivate_attach_apn_non_data_sim_on_ims =0
sm {} 1
irat_pdu_mod_no_retry_for_cause_90 =1
enas {} 1
is_irat_ho_nr_lte_tau_cell_change =1
lte_caps.ca_capabilities {} 2
max_support_of_dl_tdd_ca_carriers =3
supported_max_scells =2
as_lte_params.mobility_improvements.proprietary_mobility_criteria {} 4
data_stall_based_criteria_feature_support =1
deprioritize_cell_time =120
maximum_data_stall_cell_specific_offsets =0
min_sinr_based_criteria_feature_support =1
bottleneck_detection_feat {} 2
extCtrl =29
lte_parms [1]= 180
cdp_l2ul_param {} 1
lcm_bsr_retx_min_timer_in_ms =80
{} 3
sinr_cell_specific_offset_feature_support =1
data_stall_based_criteria_feature_support =1
min_sinr_based_criteria_feature_support =1