carrier-explode Explode and decode carrier data GitHub About
AT&T
iOS 27.2 beta 3 image · build 73.0 beta iOS 27.2 beta 1–2 image · build 72.7.2 beta OTA iOS 27.0+ · build 72.1 current release iOS 27.0 – 27.0.1 image · build 72.0.2 iOS 27.0 beta 5–8 image · build 72.0.2 beta iOS 27.0 beta 4 image · build 71.5.35 beta iOS 27.0 beta 3 image · build 71.5.34 beta iOS 27.0 beta 2 image · build 71.5.32 beta iOS 27.0 beta image · build 71.5.27 beta iOS 26.6 – 26.6.2 image · build 70.0.1 iOS 26.5 – 26.5.2 image · build 70.0 iOS 26.5.1 image · build 70.0 iOS 26.4 – 26.4.2 image · build 69.0 iOS 26.3.1 image · build 68.0 iOS 26.3 image · build 68.0 iOS 26.2 – 26.2.1 image · build 67.0 iOS 26.1 image · build 66.0 iOS 26.0 – 26.0.1 image · build 65.0.1 iOS 26.0 image · build 65.0.1 iOS 18.6 – 18.6.2 image · build 64.0.1 iOS 18.5 image · build 64.0 iOS 18.4 – 18.4.1 image · build 63.0 iOS 18.3 – 18.3.2 image · build 62.0 iOS 18.3.1 – 18.3.2 image · build 62.0 iOS 18.2 – 18.2.1 image · build 61.0 iOS 18.1 – 18.1.1 image · build 60.0 iOS 18.0 – 18.0.1 image · build 59.0 OTA iOS 17.5+ · build 58.1 OTA iOS 15.0+ · build 47.1 OTA iOS 14.6+ · build 46.4 OTA iOS 14.5+ · build 46.1 OTA iOS 14.1+ · build 45.1 OTA iOS 14.0+ · build 42.1 OTA iOS 13.4+ · build 41.1 OTA iOS 13.2+ · build 39.1 OTA iOS 13.1+ · build 38.1 OTA iOS 12.0+ · build 33.2 OTA iOS 11.2+ · build 31.1 OTA iOS 11.1+ · build 30.2 OTA iOS 11.0+ · build 29.2 OTA iOS 10.3.2+ · build 28.6 OTA iOS 10.3+ · build 28.5 OTA iOS 10.2+ · build 27.1 OTA iOS 10.0+ · build 26.1 OTA iOS 9.3+ · build 24.2 OTA iOS 9.2+ · build 23.1 OTA iOS 8.3+ · build 19.1 OTA iOS 8.0+ · build 17.1 OTA iOS 6.1+ · build 14.2 OTA iOS 3.1+ · build 5.6 OTA iOS legacy+ · build 3.1
Compare against
iOS 27.2 beta 3 image · build 73.0 beta iOS 27.2 beta 1–2 image · build 72.7.2 beta OTA iOS 27.0+ · build 72.1 current release iOS 27.0 – 27.0.1 image · build 72.0.2 iOS 27.0 beta 5–8 image · build 72.0.2 beta iOS 27.0 beta 4 image · build 71.5.35 beta iOS 27.0 beta 3 image · build 71.5.34 beta iOS 27.0 beta 2 image · build 71.5.32 beta iOS 27.0 beta image · build 71.5.27 beta iOS 26.6 – 26.6.2 image · build 70.0.1 iOS 26.5 – 26.5.2 image · build 70.0 iOS 26.5.1 image · build 70.0 iOS 26.4 – 26.4.2 image · build 69.0 iOS 26.3.1 image · build 68.0 iOS 26.3 image · build 68.0 iOS 26.2 – 26.2.1 image · build 67.0 iOS 26.1 image · build 66.0 iOS 26.0 – 26.0.1 image · build 65.0.1 iOS 26.0 image · build 65.0.1 iOS 18.6 – 18.6.2 image · build 64.0.1 iOS 18.5 image · build 64.0 iOS 18.4 – 18.4.1 image · build 63.0 iOS 18.3 – 18.3.2 image · build 62.0 iOS 18.3.1 – 18.3.2 image · build 62.0 iOS 18.1 – 18.1.1 image · build 60.0 iOS 18.0 – 18.0.1 image · build 59.0 OTA iOS 17.5+ · build 58.1 OTA iOS 15.0+ · build 47.1 OTA iOS 14.6+ · build 46.4 OTA iOS 14.5+ · build 46.1 OTA iOS 14.1+ · build 45.1 OTA iOS 14.0+ · build 42.1 OTA iOS 13.4+ · build 41.1 OTA iOS 13.2+ · build 39.1 OTA iOS 13.1+ · build 38.1 OTA iOS 12.0+ · build 33.2 OTA iOS 11.2+ · build 31.1 OTA iOS 11.1+ · build 30.2 OTA iOS 11.0+ · build 29.2 OTA iOS 10.3.2+ · build 28.6 OTA iOS 10.3+ · build 28.5 OTA iOS 10.2+ · build 27.1 OTA iOS 10.0+ · build 26.1 OTA iOS 9.3+ · build 24.2 OTA iOS 9.2+ · build 23.1 OTA iOS 8.3+ · build 19.1 OTA iOS 8.0+ · build 17.1 OTA iOS 6.1+ · build 14.2 OTA iOS 3.1+ · build 5.6 OTA iOS legacy+ · build 3.1
Compare with another bundle…
Phones (2)

Each phone's own settings and modem file, against what that phone had before.

PhonesSettingsModem file
iPhone 16, 16 Plus, 16 Pro, 16 Pro Max
Qualcomm X71M · Mav24
1 change6 changes
iPhone 15, 15 Plus, 15 Pro, 15 Pro Max
Qualcomm · Mav23
1 change6 changes
iPhone 16, 16 Plus, 16 Pro, 16 Pro Max: overrides_D93_D94_D47_D48.plist
Key pathBeforeAfter
DerPriFileVersion0.1.1630.2.164
iPhone 16, 16 Plus, 16 Pro, 16 Pro Max: overrides_D93_D94_D47_D48.der.pri
Key pathBeforeAfter
efs./policyman/carrier_policy.xml
<?xml version="1.0" encoding="UTF-8"?> <!-- Carrier policy XML for ATT $Header: $ --> <policy name = "ATT" changelist = "$Change: 14971833 $" policy_ver = "125.1.2" > <initial> <mcc_list name="us_mccs"> 310 311 312 313 314 315 316 </mcc_list> <rat_capability_if ba… 
<?xml version="1.0" encoding="UTF-8"?>

<!-- Carrier policy XML for ATT
$Header: $
-->
<policy name        = "ATT"
        changelist  = "$Change: 14971833 $"
        policy_ver  = "125.1.2"
>
  <initial>

 	<mcc_list name="us_mccs"> 310 311 312 313 314 315 316 </mcc_list>

    <rat_capability_if base="none">
      <include> C H G W L 5G </include>
    </rat_capability_if>

    <define_fullrat_config>
      <rf_bands base="hardware" />
	  <rat_capability base="hardware" />
    </define_fullrat_config>

    <rf_band_list name="rf_bands_home">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none">
        <include>1 4 65 76 </include>
      </nr5g_sa_bands>
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>

    <rf_band_list name="rf_bands_roam">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none" />
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>
    
    <boolean_define name="cm:skip_3gpp2_cap_emerg" initial="true" />

  </initial>

  <if>
    <any_of>
      <not> <phone_operating_mode> ONLINE </phone_operating_mode> </not>
      <not> <have_location /> </not>
    </any_of>
    <then>
      <stop />
    </then>
  </if>

  <!-- Beyond this point, the device is ONLINE and has a location. -->
  <svc_mode> FULL </svc_mode>
  
  <rat_capability base="hardware" />

  <!-- Determine configuration based on location -->
  <if>
    <location_mcc_in list="us_mccs" />
    <then>    
      <rat_capability base="none">
        <include> W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_home" />
    </then>
    <else>
      <rat_capability base="none">
        <include> G W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_roam" />
    </else>
  </if>

</policy>
<?xml version="1.0" encoding="UTF-8"?> <!-- Carrier policy XML for ATT $Header: $ --> <policy name = "ATT" changelist = "$Change: 14971833 $" policy_ver = "125.1.2" > <initial> <mcc_list name="us_mccs"> 310 311 312 313 314 315 316 330 544 </mcc_list> <rat_capabili… 
<?xml version="1.0" encoding="UTF-8"?>

<!-- Carrier policy XML for ATT
$Header: $
-->
<policy name        = "ATT"
        changelist  = "$Change: 14971833 $"
        policy_ver  = "125.1.2"
>
  <initial>

 	<mcc_list name="us_mccs"> 310 311 312 313 314 315 316 330 544 </mcc_list>

    <rat_capability_if base="none">
      <include> C H G W L 5G </include>
    </rat_capability_if>

    <define_fullrat_config>
      <rf_bands base="hardware" />
	  <rat_capability base="hardware" />
    </define_fullrat_config>

    <rf_band_list name="rf_bands_home">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none">
        <include>1 4 65 76 </include>
      </nr5g_sa_bands>
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>

    <rf_band_list name="rf_bands_roam">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none" />
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>
    
    <boolean_define name="cm:skip_3gpp2_cap_emerg" initial="true" />

  </initial>

  <if>
    <any_of>
      <not> <phone_operating_mode> ONLINE </phone_operating_mode> </not>
      <not> <have_location /> </not>
    </any_of>
    <then>
      <stop />
    </then>
  </if>

  <!-- Beyond this point, the device is ONLINE and has a location. -->
  <svc_mode> FULL </svc_mode>
  
  <rat_capability base="hardware" />

  <!-- Determine configuration based on location -->
  <if>
    <location_mcc_in list="us_mccs" />
    <then>    
      <rat_capability base="none">
        <include> W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_home" />
    </then>
    <else>
      <rat_capability base="none">
        <include> G W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_roam" />
    </else>
  </if>

</policy>
header.PRI Revision0.1.1630.2.164
schema[315]absent/nv/item_files/modem/nas/disable_sensitive_information
schema[316]absent/nv/item_files/gps/cgps/sm/gnss_text_to_emergency_window
schema[317]absent/nv/item_files/modem/mav/enable_ds_mit_for_marginal_coverage
schema[318]absent/nv/item_files/modem/mmode/sd/mav_sd_emerg_call_allow_lmtd_srv
iPhone 15, 15 Plus, 15 Pro, 15 Pro Max: overrides_D83_D84_D37_D38.plist
Key pathBeforeAfter
DerPriFileVersion0.1.1740.2.175
iPhone 15, 15 Plus, 15 Pro, 15 Pro Max: overrides_D83_D84_D37_D38.der.pri
Key pathBeforeAfter
efs./policyman/carrier_policy.xml
<?xml version="1.0" encoding="UTF-8"?> <!-- Carrier policy XML for ATT $Header: $ --> <policy name = "ATT" changelist = "$Change: 14971833 $" policy_ver = "125.1.2" > <initial> <mcc_list name="us_mccs"> 310 311 312 313 314 315 316 </mcc_list> <rat_capability_if ba… 
<?xml version="1.0" encoding="UTF-8"?>

<!-- Carrier policy XML for ATT
$Header: $
-->
<policy name        = "ATT"
        changelist  = "$Change: 14971833 $"
        policy_ver  = "125.1.2"
>
  <initial>

 	<mcc_list name="us_mccs"> 310 311 312 313 314 315 316 </mcc_list>

    <rat_capability_if base="none">
      <include> C H G W L 5G </include>
    </rat_capability_if>

    <define_fullrat_config>
      <rf_bands base="hardware" />
	  <rat_capability base="hardware" />
    </define_fullrat_config>

    <rf_band_list name="rf_bands_home">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none">
        <include>1 4 65 76 </include>
      </nr5g_sa_bands>
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>

    <rf_band_list name="rf_bands_roam">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none" />
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>
    
    <boolean_define name="cm:skip_3gpp2_cap_emerg" initial="true" />

  </initial>

  <if>
    <any_of>
      <not> <phone_operating_mode> ONLINE </phone_operating_mode> </not>
      <not> <have_location /> </not>
    </any_of>
    <then>
      <stop />
    </then>
  </if>

  <!-- Beyond this point, the device is ONLINE and has a location. -->
  <svc_mode> FULL </svc_mode>
  
  <rat_capability base="hardware" />

  <!-- Determine configuration based on location -->
  <if>
    <location_mcc_in list="us_mccs" />
    <then>    
      <rat_capability base="none">
        <include> W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_home" />
    </then>
    <else>
      <rat_capability base="none">
        <include> G W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_roam" />
    </else>
  </if>

</policy>
<?xml version="1.0" encoding="UTF-8"?> <!-- Carrier policy XML for ATT $Header: $ --> <policy name = "ATT" changelist = "$Change: 14971833 $" policy_ver = "125.1.2" > <initial> <mcc_list name="us_mccs"> 310 311 312 313 314 315 316 330 544 </mcc_list> <rat_capabili… 
<?xml version="1.0" encoding="UTF-8"?>

<!-- Carrier policy XML for ATT
$Header: $
-->
<policy name        = "ATT"
        changelist  = "$Change: 14971833 $"
        policy_ver  = "125.1.2"
>
  <initial>

 	<mcc_list name="us_mccs"> 310 311 312 313 314 315 316 330 544 </mcc_list>

    <rat_capability_if base="none">
      <include> C H G W L 5G </include>
    </rat_capability_if>

    <define_fullrat_config>
      <rf_bands base="hardware" />
	  <rat_capability base="hardware" />
    </define_fullrat_config>

    <rf_band_list name="rf_bands_home">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none">
        <include>1 4 65 76 </include>
      </nr5g_sa_bands>
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>

    <rf_band_list name="rf_bands_roam">
      <gw_bands base="hardware" />
      <lte_bands base="hardware" />
      <tds_bands base="none" />
      <nr5g_sa_bands base="none" />
      <nr5g_nsa_bands base="hardware" />
    </rf_band_list>
    
    <boolean_define name="cm:skip_3gpp2_cap_emerg" initial="true" />

  </initial>

  <if>
    <any_of>
      <not> <phone_operating_mode> ONLINE </phone_operating_mode> </not>
      <not> <have_location /> </not>
    </any_of>
    <then>
      <stop />
    </then>
  </if>

  <!-- Beyond this point, the device is ONLINE and has a location. -->
  <svc_mode> FULL </svc_mode>
  
  <rat_capability base="hardware" />

  <!-- Determine configuration based on location -->
  <if>
    <location_mcc_in list="us_mccs" />
    <then>    
      <rat_capability base="none">
        <include> W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_home" />
    </then>
    <else>
      <rat_capability base="none">
        <include> G W L 5G </include>
      </rat_capability>
      <rf_bands list="rf_bands_roam" />
    </else>
  </if>

</policy>
header.PRI Revision0.1.1740.2.175
schema[315]absent/nv/item_files/modem/nas/disable_sensitive_information
schema[316]absent/nv/item_files/gps/cgps/sm/gnss_text_to_emergency_window
schema[317]absent/nv/item_files/modem/mav/enable_ds_mit_for_marginal_coverage
schema[318]absent/nv/item_files/modem/mmode/sd/mav_sd_emerg_call_allow_lmtd_srv
Routine changes (8 files): version number only, per-phone file, compared by phone above, signature
FileKindWhy it is routine
Info.plistchangedversion number only
overrides_D83_D84_D37_D38.der.prichangedper-phone file, compared by phone above
overrides_D83_D84_D37_D38.plistchangedper-phone file, compared by phone above
overrides_D93_D94_D47_D48.der.prichangedper-phone file, compared by phone above
overrides_D93_D94_D47_D48.plistchangedper-phone file, compared by phone above
signatures/common.plistchangedsignature
signatures/overrides_D83_D84_D37_D38.plistchangedsignature
signatures/overrides_D93_D94_D47_D48.plistchangedsignature
carrier.plist changed 1 row Before After only this file