overrides_V59.der.pri Modem package; this file is its whole carrier config.

Header

PRI Name	Softbank_YMobile_jp
PRI Revision	2.0.3

Baseband overrides (161)

Raw values Key list

▾ dyn_cps {} 12

▾ apf {} 8

▸ csfb.cps_apf_csfb_nas_cfg {} 1

▸ utran_disabled_mcc_list {} 2

▸ lte_as_band_scan_opt {} 1

▸ lte_data_stall_mitigation_config {} 1

▸ lte_fast_dormancy {} 1

▸ ue_capability_enhancement.bc_filters {} 4

▸ rat_icon.nas_config {} 10

▸ sat {} 6

▾ mm {} 4

· mm_enable_limited_svc_in_manual_mode_on_no_voice =1

· mm_no_disable_lte_for_hplmn_ims_reg_fail =1

· cause_27_n1_disable_duration =30

· temp_n1_disable_duration =30

▾ nas_om.mode_on_profile {} 2

▸ bands.utran {} 1

▸ fgi {} 2

▾ op_features {} 3

· no_pco_in_implicit_pdn_req =1

· disable_umts_while_in_japan_mcc_enabled =1

▸ hplmn_band_restriction {} 3

▾ ps_features {} 4

· fe_cell_fach =0

· sic_p_cscf_resel_supported =1

· apn_config_switch_attach_rej =1

· hpue_ul_ca_support =0

▾ ue_ra_cap_features {} 4

· enhanced_fdpch_supported =0

· fdpch_supported =0

· feat_hspa_dtx_drx =0

· feat_mac_iis =0

▾ as_lte_params.mobility_improvements {} 2

▸ autonomous_irat_gap_configuration {} 1

▸ proprietary_mobility_criteria {} 3

▾ enas {} 1

· emm_tau_procedure_with_urc_on_band_change_in_5g =1

▾ errc {} 6

· alt_tb_ind_support =1

· intraband_cont_cc_info_support =0

· lte_ul_256qam_support =0

· new_est_cause_volte_in_eutra_support =0

▸ plmn_band_restriction_info {} 2

· skip_pucch_sim_ack_nack_cqi_reconfig_check =1

▾ eutran_caps {} 5

· enhancedDualLayerFDD_r9 =0

▸ feature_group_indicators {} 1

▸ ngh_acq {} 2

· tm9_with_8tx_fdd_r10_supported =0

· ue_specific_ref_sigs_supported =0

▾ lte_caps {} 3

▸ ca_capabilities {} 4

· feat_psho_utran_to_eutran =0

· feat_psho_utran_to_eutran_tdd =0

▾ nas_pch {} 1

· ue_initiated_block_ded_bearer =1

▾ dyn_cps_5g {} 2

▾ as_5g_caps {} 3

▸ lte_caps {} 2

▸ mrdc_caps.common_caps.caps_v15 {} 2

▸ nr_caps {} 6

▾ as_5g_params {} 2

▸ hplmn_based_filter_params {} 2

▸ rf_params {} 2