carrier-explode iOS carrier and country bundles
782 of 782
Claro_prPR PuertoRico country bundle
  1. iOS 27.0 image · build 72.0.1
  2. iOS 26.5 – 26.6.2 image · build 70.0
  3. iOS 26.4 – 26.4.2 image · build 69.0
  4. iOS 26.3 – 26.3.1 image · build 68.0
  5. iOS 26.2 – 26.2.1 image · build 67.0
  6. iOS 26.1 image · build 66.0
  7. iOS 26.0 – 26.0.1 image · build 65.0
  8. OTA · iOS 15.2+ · build 49.2
  9. OTA · iOS 14.5+ · build 46.1
  10. OTA · iOS 12.3+ · build 36.1
  11. OTA · iOS 11.1+ · build 30.1
  12. OTA · iOS 7.1+ · build 16.1
  13. OTA · iOS 7.0+ · build 15.6
  14. OTA · iOS 5.0+ · build 11.1
  15. OTA · iOS 14.5+ · build 46.1 · iPad
  16. OTA · iOS 14.1+ · build 44.1 · iPadshown
OTA · iOS 14.1+ · build 44.1 · iPad (16)
  1. iOS 27.0 image · build 72.0.1
  2. iOS 26.5 – 26.6.2 image · build 70.0
  3. iOS 26.4 – 26.4.2 image · build 69.0
  4. iOS 26.3 – 26.3.1 image · build 68.0
  5. iOS 26.2 – 26.2.1 image · build 67.0
  6. iOS 26.1 image · build 66.0
  7. iOS 26.0 – 26.0.1 image · build 65.0
  8. OTA · iOS 15.2+ · build 49.2
  9. OTA · iOS 14.5+ · build 46.1
  10. OTA · iOS 12.3+ · build 36.1
  11. OTA · iOS 11.1+ · build 30.1
  12. OTA · iOS 7.1+ · build 16.1
  13. OTA · iOS 7.0+ · build 15.6
  14. OTA · iOS 5.0+ · build 11.1
  15. OTA · iOS 14.5+ · build 46.1 · iPad
  16. OTA · iOS 14.1+ · build 44.1 · iPadshown
APNEditabilityTypemaskNew = 1 bits 0 · 0x1
StatusBarImages [] 2
Carrier logos drawn in place of the operator name (older iOS only).
[0] {} 3
CarrierName = "PRI CLARO"
Operator name shown in the status bar and in Settings.
AllowPrefixMatching = false
StatusBarCarrierName = "CLARO PR"
[1] {} 3
CarrierName = "PR CLARO"
Operator name shown in the status bar and in Settings.
AllowPrefixMatching = false
StatusBarCarrierName = "CLARO PR"
AttachAPN {} 1
The APN attached at LTE/NR registration, before any user-selected APN.
3GPP {} 1
apn = "ltem.claropr.com.ar"
CarrierName = "Claro Puerto Rico"
Operator name shown in the status bar and in Settings.
OTASoftwareUpdate {} 1
Whether iOS updates over cellular need carrier opt-in.
SoftwareUpdateOptInRequired = true
SupportsNITZ = true
MaxBluetoothModemConnections = 5
SupportedSIMs [] 2
MCC+MNC values (optionally with _GID1-/_GID2-/_ID- qualifiers) this bundle claims. The handset picks a bundle by matching the SIM against this list.
[0] = "33011"
[1] = "330110"
apns [] 1
Access Point Names. Each entry carries a type-mask (which services may use it) and a tech-type-mask (which radio technologies).
[0] {} 4
type-mask = 49 bits 0, 4, 5 · 0x31
Bitmask of service classes allowed on this APN (internet, MMS, tethering, IMS, …).
password = ""
username = ""
apn = "ltem.claropr.com.ar"
782 carriers, 225 countries · iOS 27.0 (24A437) Claro_pr GitHub Ready