carrier-explode Explode and decode carrier data GitHub About
1758
Yettel HU

hu_yettel in the Samsung Shannon modem firmware of CP3A.261005.002.A1, on its base layers.

Header
Manifest versionv0.1
Carrier id1534
Selected by (1)

The SIMs the modem loads this configuration for.

Which SIMsMCC-MNC
any SIM21601
Settings (32)partly decoded

DS (14)

DS.PSS.AIMS.Audio.Capability = 5
u8
DS.NASU.SUPPORTED.EMC.IMS = 2
u16
DS.PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
DS.NR.CONFIG.MODE = 1
u8
DS.NASU.NR.CONFIG.MODE = 1
u8
DS.PSS.GMC_NrRoamingDisableType = 10
u8
DS.PSS.XCAP.AS.Server.Domain = "xcap.ims.mnc001.mcc216.pub.3gppnetwork.org"
u8[60]
DS.PSS.XCAP.BSF.Server.Domain = "bsf.ims.mnc001.mcc216.pub.3gppnetwork.org"
u8[60]
DS.PSS.XCAP.CF.NoReply.Node.Req = 4
u8
DS.PSS.AIMS.EVS.Codec.Info = 1, 15, 0, 1, 1, 1, 2, 4, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
DS.PSS.AIMS.EVS.BR.Min = 1, 1
u8[2]
DS.PSS.AIMS.EVS.ChAwRecv = -1, -1
s8[2]
DS.PSS.XCAP.Pref.Ip.Type = 2
u8
DS.PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim2, which a later layer replaces

NASU (2)

NASU.SUPPORTED.EMC.IMS = 2
u16
NASU.NR.CONFIG.MODE = 1
u8

NR (1)

NR.CONFIG.MODE = 1
u8

NRCAPA (4)

!NRCAPA.Switch.DssFeature = 1
u8
!NRCAPA.Gen.DynamicPowerSharing = 1
u8
!NRCAPA.Switch.DssFeature_DS = 1
u8
!NRCAPA.Gen.DynamicPowerSharing_DS = 1
u8

PSS (11)

PSS.AIMS.Audio.Capability = 5
u8
PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
PSS.GMC_NrRoamingDisableType = 10
u8
PSS.XCAP.AS.Server.Domain = "xcap.ims.mnc001.mcc216.pub.3gppnetwork.org"
u8[60]
PSS.XCAP.BSF.Server.Domain = "bsf.ims.mnc001.mcc216.pub.3gppnetwork.org"
u8[60]
PSS.XCAP.CF.NoReply.Node.Req = 4
u8
PSS.AIMS.EVS.Codec.Info = 1, 15, 0, 1, 1, 1, 2, 4, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
PSS.AIMS.EVS.BR.Min = 1, 1
u8[2]
PSS.AIMS.EVS.ChAwRecv = -1, -1
s8[2]
PSS.XCAP.Pref.Ip.Type = 2
u8
PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim1, which a later layer replaces