carrier-explode Explode and decode carrier data GitHub About
1758
U Mobile

my_umobile in the Samsung Shannon modem firmware of CP3A.261005.002.A1, on its base layers.

Header
Manifest versionv0.1
Carrier id1632
Selected by (1)

The SIMs the modem loads this configuration for.

Which SIMsMCC-MNC
any SIM50218
Settings (34)partly decoded

ds (1)

ds_PSS.GMC_Emc_Wait_For_Lte_Attach_Enabled = 2
u8

DS (14)

DS.PSS.AIMS.Audio.Capability = 5
u8
DS.NASU.SUPPORTED.EMC.IMS = 2
u16
DS.PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
DS.NR.CONFIG.MODE = 1
u8
DS.NASU.NR.CONFIG.MODE = 1
u8
DS.PSS.GMC_NrRoamingDisableType = 10
u8
DS.PSS.AIMS.Operator-Spec = 160
u8
DS.PSS.AIMS.DYNAMIC_OPERATORSPEC_FLAG = 0
u8
DS.PSS.AIMS.Pref.Uri.Type = 0
u8
DS.PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
DS.PSS.AIMS.EVS.Codec.Info = 1, 15, 15, 0, 0, 1, 0, 4, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
DS.PSS.XCAP.Bsf.RemotePort = 8080
u16
DS.PSS.XCAP.CF.NoReply.Node.Req = 3
u8
DS.PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim2, which a later layer replaces

NASU (2)

NASU.SUPPORTED.EMC.IMS = 2
u16
NASU.NR.CONFIG.MODE = 1
u8

NR (1)

NR.CONFIG.MODE = 1
u8

NRCAPA (4)

!NRCAPA.Switch.DssFeature = 1
u8
!NRCAPA.Gen.DynamicPowerSharing = 1
u8
!NRCAPA.Switch.DssFeature_DS = 1
u8
!NRCAPA.Gen.DynamicPowerSharing_DS = 1
u8

PSS (12)

PSS.AIMS.Audio.Capability = 5
u8
PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
PSS.GMC_NrRoamingDisableType = 10
u8
PSS.AIMS.Operator-Spec = 160
u8
PSS.AIMS.DYNAMIC_OPERATORSPEC_FLAG = 0
u8
PSS.AIMS.Pref.Uri.Type = 0
u8
PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
PSS.AIMS.EVS.Codec.Info = 1, 15, 15, 0, 0, 1, 0, 4, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
PSS.XCAP.Bsf.RemotePort = 8080
u16
PSS.XCAP.CF.NoReply.Node.Req = 3
u8
PSS.GMC_Emc_Wait_For_Lte_Attach_Enabled = 2
u8
PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim1, which a later layer replaces
Band combinations (1408)
SourceCombos
uecap/APAC_COMMON.binarypb1408