carrier-explode Explode and decode carrier data GitHub About
1758
Telenet

be_telenet in the Samsung Shannon modem firmware of CP3A.261005.002.A1, on its base layers.

Header
Manifest versionv0.1
Carrier id2150
Selected by (1)

The SIMs the modem loads this configuration for.

Which SIMsMCC-MNC
any SIM20605
Settings (30)partly decoded

DS (13)

DS.PSS.AIMS.Audio.Capability = 5
u8
DS.NASU.SUPPORTED.EMC.IMS = 3
u16
DS.PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
DS.NR.CONFIG.MODE = 1
u8
DS.NASU.NR.CONFIG.MODE = 1
u8
DS.PSS.GMC_NrRoamingDisableType = 10
u8
DS.PSS.AIMS.Operator-Spec = 237
u8
DS.PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
DS.PSS.AIMS.EVS.ChAwRecv = -1, 0
s8[2]
DS.PSS.AIMS.EVS.Codec.Info = 1, 15, 0, 1, 1, 1, 2, 4, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
DS.PSS.AIMS.SIP_HEADER_GEOLOCATION_SUPPORT = 10
u8
DS.PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim2, which a later layer replaces
DS.NASU.SUPPORTED.EMC.IMS = 2
u16 · set by wildcard.sim2, which a later layer replaces

NASU (3)

NASU.SUPPORTED.EMC.IMS = 3
u16
NASU.NR.CONFIG.MODE = 1
u8
NASU.SUPPORTED.EMC.IMS = 2
u16 · set by wildcard.sim1, which a later layer replaces

NR (1)

NR.CONFIG.MODE = 1
u8

NRCAPA (4)

!NRCAPA.Switch.DssFeature = 1
u8
!NRCAPA.Gen.DynamicPowerSharing = 1
u8
!NRCAPA.Switch.DssFeature_DS = 1
u8
!NRCAPA.Gen.DynamicPowerSharing_DS = 1
u8

PSS (9)

PSS.AIMS.Audio.Capability = 5
u8
PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
PSS.GMC_NrRoamingDisableType = 10
u8
PSS.AIMS.Operator-Spec = 237
u8
PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
PSS.AIMS.EVS.ChAwRecv = -1, 0
s8[2]
PSS.AIMS.EVS.Codec.Info = 1, 15, 0, 1, 1, 1, 2, 4, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
PSS.AIMS.SIP_HEADER_GEOLOCATION_SUPPORT = 10
u8
PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim1, which a later layer replaces
Band combinations (2747)
SourceCombos
uecap/EU_COMMON.binarypb2747