carrier-explode Explode and decode carrier data GitHub About

pl_telekom in the Samsung Shannon modem firmware of CP3A.261005.002.A1, on its base layers.

Header
Manifest versionv0.1
Carrier id2367
Selected by (1)

The SIMs the modem loads this configuration for.

Which SIMsMCC-MNC
any SIM26002
Settings (26)partly decoded

DS (11)

DS.PSS.AIMS.Audio.Capability = 5
u8
DS.NASU.SUPPORTED.EMC.IMS = 2
u16
DS.PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
DS.NR.CONFIG.MODE = 1
u8
DS.PSS.AIMS.Payload-EVS = "~"
u8[2]
DS.PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
DS.PSS.AIMS.EVS.Codec.Info = 1, 15, 15, 15, 1, 1, 0, 1, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
DS.PSS.XCAP.CF.NoReply.Node.Req = 4
u8
DS.PSS.AIMS.EMC.SUB.SERV = 3
u8
DS.PSS.AIMS.Operator-Spec = 95
u8
DS.PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim2, which a later layer replaces

NASU (1)

NASU.SUPPORTED.EMC.IMS = 2
u16

NR (1)

NR.CONFIG.MODE = 1
u8

NRCAPA (4)

!NRCAPA.Switch.DssFeature = 1
u8
!NRCAPA.Gen.DynamicPowerSharing = 1
u8
!NRCAPA.Switch.DssFeature_DS = 1
u8
!NRCAPA.Gen.DynamicPowerSharing_DS = 1
u8

PSS (9)

PSS.AIMS.Audio.Capability = 5
u8
PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
PSS.AIMS.Payload-EVS = "~"
u8[2]
PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
PSS.AIMS.EVS.Codec.Info = 1, 15, 15, 15, 1, 1, 0, 1, 7, 0, 0, 0, 0, 6, 0, 0, 1, 1, 0, 0, 2, 0
u8[30]
PSS.XCAP.CF.NoReply.Node.Req = 4
u8
PSS.AIMS.EMC.SUB.SERV = 3
u8
PSS.AIMS.Operator-Spec = 95
u8
PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim1, which a later layer replaces