carrier-explode Explode and decode carrier data GitHub About
1758
POST

lu_post in the Samsung Shannon modem firmware of CP3A.261005.002.A1, on its base layers.

Header
Manifest versionv0.1
Carrier id895
Selected by (1)

The SIMs the modem loads this configuration for.

Which SIMsMCC-MNC
any SIM27001
Settings (32)partly decoded

DS (14)

DS.PSS.AIMS.Audio.Capability = 5
u8
DS.NASU.SUPPORTED.EMC.IMS = 2
u16
DS.PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
DS.NR.CONFIG.MODE = 1
u8
DS.NASU.NR.CONFIG.MODE = 1
u8
DS.PSS.GMC_NrRoamingDisableType = 10
u8
DS.PSS.XCAP.AS.Server.Domain = "xcap.ims.mnc001.mcc270.pub.3gppnetwork.org"
u8[60]
DS.PSS.XCAP.BSF.Server.Domain = "bsf.mnc001.mcc270.pub.3gppnetwork.org"
u8[60]
DS.PSS.XCAP.Bsf.RemotePort = 10080
u16
DS.PSS.XCAP.Pref.Ip.Type = 2
u8
DS.PSS.AIMS.EVS.BR.Max = 7, 7
u8[2]
DS.PSS.AIMS.EVS.BR.Min = 5, 5
u8[2]
DS.PSS.AIMS.EVS.BW.Info = 6, 6
u8[2]
DS.PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim2, which a later layer replaces

NASU (2)

NASU.SUPPORTED.EMC.IMS = 2
u16
NASU.NR.CONFIG.MODE = 1
u8

NR (1)

NR.CONFIG.MODE = 1
u8

NRCAPA (4)

!NRCAPA.Switch.DssFeature = 1
u8
!NRCAPA.Gen.DynamicPowerSharing = 1
u8
!NRCAPA.Switch.DssFeature_DS = 1
u8
!NRCAPA.Gen.DynamicPowerSharing_DS = 1
u8

PSS (11)

PSS.AIMS.Audio.Capability = 5
u8
PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
PSS.GMC_NrRoamingDisableType = 10
u8
PSS.XCAP.AS.Server.Domain = "xcap.ims.mnc001.mcc270.pub.3gppnetwork.org"
u8[60]
PSS.XCAP.BSF.Server.Domain = "bsf.mnc001.mcc270.pub.3gppnetwork.org"
u8[60]
PSS.XCAP.Bsf.RemotePort = 10080
u16
PSS.XCAP.Pref.Ip.Type = 2
u8
PSS.AIMS.EVS.BR.Max = 7, 7
u8[2]
PSS.AIMS.EVS.BR.Min = 5, 5
u8[2]
PSS.AIMS.EVS.BW.Info = 6, 6
u8[2]
PSS.AIMS.Audio.Capability = 1
u8 · set by wildcard.sim1, which a later layer replaces
Band combinations (2747)
SourceCombos
uecap/EU_COMMON.binarypb2747