carrier-explode Explode and decode carrier data GitHub About
Plus

pl_plus in the Samsung Shannon modem firmware of CP3A.261005.002.A1, on its base layers.

Header
Manifest versionv0.1
Carrier id1658
Selected by (1)

The SIMs the modem loads this configuration for.

Which SIMsMCC-MNC
any SIM26001
Settings (26)partly decoded

DS (11)

DS.PSS.AIMS.Audio.Capability = 1
u8
DS.NASU.SUPPORTED.EMC.IMS = 2
u16
DS.PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
DS.NR.CONFIG.MODE = 1
u8
DS.PSS.AIMS.DYNAMIC_OPERATORSPEC_FLAG = 0
u8
DS.PSS.AIMS.Operator-Spec = 44
u8
DS.PSS.AIMS.Precondition-support = 0
u8
DS.PSS.AIMS.Precondtion QOS Enable = 0
u8
DS.PSS.AIMS.EMC-PRECONDITION-ENABLE = 0
u8
DS.PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
DS.PSS.AIMS.SIPMSG.MTU.CHECK = 3
u8

NASU (1)

NASU.SUPPORTED.EMC.IMS = 2
u16

NR (1)

NR.CONFIG.MODE = 1
u8

NRCAPA (4)

!NRCAPA.Switch.DssFeature = 1
u8
!NRCAPA.Gen.DynamicPowerSharing = 1
u8
!NRCAPA.Switch.DssFeature_DS = 1
u8
!NRCAPA.Gen.DynamicPowerSharing_DS = 1
u8

PSS (9)

PSS.AIMS.Audio.Capability = 1
u8
PSS.AIMS.NON-DETECTABLE-EMC.Checking-PAIheader = 1
u8
PSS.AIMS.DYNAMIC_OPERATORSPEC_FLAG = 0
u8
PSS.AIMS.Operator-Spec = 44
u8
PSS.AIMS.Precondition-support = 0
u8
PSS.AIMS.Precondtion QOS Enable = 0
u8
PSS.AIMS.EMC-PRECONDITION-ENABLE = 0
u8
PSS.AIMS.EVS.BR.Min = 1, 4
u8[2]
PSS.AIMS.SIPMSG.MTU.CHECK = 3
u8