carrier-explode Explode and decode carrier data GitHub About
inet

es_o2 in the Samsung Shannon modem firmware of CP3A.261005.002.A1, on its base layers.

Header
Manifest versionv0.1
Carrier id34
Selected by (1)

The SIMs the modem loads this configuration for.

Which SIMsMCC-MNC
any SIM21405, 21407
Settings (81)partly decoded

ds (4)

ds_NASL3.PLMN.Samsung SOR Feature Status = 1
u8
ds_NASL3.MM.A5_algorithms = 1, 0, 1, 0, 0, 0, 0
u8[7]
ds_NASL3.MM.gprs_multislot_class = 12
u8
ds_NASL3.MM.A5_algorithms = 1, 0, 1, 1, 0, 0, 0
u8[7] · set by eu_common.sim2, which a later layer replaces

DS (24)

DS_TCS_GV_OPT_CARRIER_TYPE = 257
u32
DS_GL3.Edge_Band_Config = 15
u8
DS.NR.CONFIG.MODE = 1
u8
DS.PSS.GMC_NrRoamingDisableType = 14
u8
DS.OMC.BASED.NR.PLMN.ENABLE = 1
u8
DS.OMC.NR.PLMN.LIST.MODE = 1
u8
DS.OMC.NR.PLMN.LIST.COUNT = 2
u32
DS.OMC.NR.PLMN.LIST.DATA = 33, 64, 95, 33, 64, 127
u8[1000]
DS.PSS.AIMS.Operator-Spec = 181
u8
DS.PSS.AIMS.DYNAMIC_OPERATORSPEC_FLAG = 0
u8
DS.PSS.AIMS.Payload-AMRNB = 102, 108
u8[2]
DS.PSS.AIMS.Payload-AMRWB = 104, 110
u8[2]
DS.PSS.AIMS.Payload-EVS = "~"
u8[2]
DS.PSS.AIMS.PREALERTING_SRVCC = 0
u8
DS.PSS.XCAP.As.RemotePort = 8089
u16
DS.PSS.XCAP.Bsf.RemotePort = 8088
u16
DS.PSS.AIMS.Conference.SUBSCRIBE-TYPE = 0
u8
DS.NASU.SUPPORTED.EMC.IMS = 2
u16
DS.PSS.AIMS.RELIABLE_18X_SUPPORT = 1
u8
DS.PSS.AIMS.MT.CALLEDNUM.SOURCE = 1
u8
DS.PSS.AIMS.SessionRefresh-Method = 1
u8
DS.PSS.AIMS.ACCESSTYPE.SUPPORT = 0
u8
DS.PSS.AIMS.MT.USSD.Support = 0
u8
DS_TCS_GV_OPT_CARRIER_TYPE = 256
u32 · set by eu_common.sim2, which a later layer replaces

gDS (1)

gDS_TCS_FCI_info = 69, 83, 80, 49, 50
u8[5]

GL3 (1)

GL3.Edge_Band_Config = 15
u8

gTCS (1)

gTCS_FCI_info = 69, 83, 80, 49, 50
u8[5]

HCOMMON (4)

HCOMMON.Support of Quick Rollback To LTE = 0
u8
HCOMMON.WB-AMR Enabled_obsolete = 1
u8
HCOMMON.Support of Quick Rollback To LTE_DS = 0
u8
HCOMMON.WB-AMR Enabled_obsolete_DS = 1
u8

LTENR (1)

!LTENR.NSA.UECAPA.NR.GEN.DRX.CYCLE = 3
u8

NASL3 (4)

NASL3.PLMN.Samsung SOR Feature Status = 1
u8
NASL3.MM.A5_algorithms = 1, 0, 1, 0, 0, 0, 0
u8[7]
NASL3.MM.gprs_multislot_class = 12
u8
NASL3.MM.A5_algorithms = 1, 0, 1, 1, 0, 0, 0
u8[7] · set by eu_common.sim1, which a later layer replaces

NASU (1)

NASU.SUPPORTED.EMC.IMS = 2
u16

NR (1)

NR.CONFIG.MODE = 1
u8

NRCAPA (4)

!NRCAPA.Switch.DssFeature = 1
u8
!NRCAPA.Gen.DynamicPowerSharing = 1
u8
!NRCAPA.Switch.DssFeature_DS = 1
u8
!NRCAPA.Gen.DynamicPowerSharing_DS = 1
u8

OMC (4)

OMC.BASED.NR.PLMN.ENABLE = 1
u8
OMC.NR.PLMN.LIST.MODE = 1
u8
OMC.NR.PLMN.LIST.COUNT = 2
u32
OMC.NR.PLMN.LIST.DATA = 33, 64, 95, 33, 64, 127
u8[1000]

PSS (16)

PSS.SMS.CBS Activation = 0
u8
PSS.GMC_NrRoamingDisableType = 14
u8
PSS.AIMS.Operator-Spec = 181
u8
PSS.AIMS.DYNAMIC_OPERATORSPEC_FLAG = 0
u8
PSS.AIMS.Payload-AMRNB = 102, 108
u8[2]
PSS.AIMS.Payload-AMRWB = 104, 110
u8[2]
PSS.AIMS.Payload-EVS = "~"
u8[2]
PSS.AIMS.PREALERTING_SRVCC = 0
u8
PSS.XCAP.As.RemotePort = 8089
u16
PSS.XCAP.Bsf.RemotePort = 8088
u16
PSS.AIMS.Conference.SUBSCRIBE-TYPE = 0
u8
PSS.AIMS.RELIABLE_18X_SUPPORT = 1
u8
PSS.AIMS.MT.CALLEDNUM.SOURCE = 1
u8
PSS.AIMS.SessionRefresh-Method = 1
u8
PSS.AIMS.ACCESSTYPE.SUPPORT = 0
u8
PSS.AIMS.MT.USSD.Support = 0
u8

SAEL3 (2)

!SAEL3.DETACH_RE_ATTACH_REQUIRED = 1
u8
!SAEL3_DS.DETACH_RE_ATTACH_REQUIRED = 1
u8

TCS (2)

TCS_GV_OPT_CARRIER_TYPE = 257
u32
TCS_GV_OPT_CARRIER_TYPE = 256
u32 · set by eu_common.sim1, which a later layer replaces

UECAPA (7)

UECAPA_NR_RF_BAND_FR1_BM = 49162
u16
UECAPA_NR_RF_BAND_FR2_BM = 49162
u16
UECAPA_NR_RF_BAND_FR1_BM_DS = 49162
u16
UECAPA_NR_RF_BAND_FR2_BM_DS = 49162
u16
UECAPA_REL11_CRS_INTERFHANDL = 1
u8
UECAPA_NR_RF_BAND_FR1_BM = 51210
u16 · set by eu_nr_common.sim1, which a later layer replaces
UECAPA_NR_RF_BAND_FR1_BM_DS = 51210
u16 · set by eu_nr_common.sim2, which a later layer replaces

UL3 (4)

UL3.Cap.Phych.supp_of_Efdpch = 1
bool
UL3.Cap.Phych.supp_of_fdpch = 1
bool
UL3.Cap.Phych.slotFormat4 = 0
bool
UL3.Cap.Phych.supp_ul_dtx = 0
u8